Mechanical Filter Press

Product Detail

Comparing with the other filter press types, the difference of mechanical filter press is the closing type. As the name, the mechanical filter press is closed by mechanical forces (screws, gears, driving motor). This filter press machine has following advantages: simple structure, safe operation, lower power consumption and easy maintenance. 



While filter press operation, the motor drives the reducer to move screw forward and backward, thus to finish close and open filter press plates. And on our screw, there was a special lock nut, which can easily and stably realize pressure keeping. Additionally, our mechanical filter press adopts the motor comprehensive protector to realize automatic control and realize over-heating and overload protection. Regarding the filter plate pack, we will recommend according to your actual material and technical needs. Additionally the filtering area of mechanical filter press normally is 15-120 s.q.m., and it adopts manual cake discharging.



Although it has advantages, however, for foreign markets, we normally don’t recommend the mechanical filter press. Because comparing with hydraulic filter press, their cost basically same, but hydraulic filter press has better filtering sealing performance. If you want to know info on side beam filter presses, pls contact us.






Mechanical Filter Press Specifications
Filtering Area (m2)	Plate Size (mm)	Cake Thickness (mm)	Chamber Volume (L)	Plate QTY (pcs)	Power (kw)	Dimensions (mm)
15	700*700	30	226	18	2.2	2840*900*1100
20			298	24		3140*900*1100
30			452	37		3790*900*1100
40			595	49		4390*900*1100
30	870*870	30	460	23	2.2	3380*1400*1300
40			595	30		3770*1400*1300
50			749	38		4210*1400*1300
60			902	46		4650*1400*1300
70			1056	54		5080*1400*1300
80			1210	62		5520*1400*1300
50	1000*1000	30	737	28	4	4150*1500*1400
60			889	34		4460*1500*1400
70			1041	40		4760*1500*1400
80			1194	46		5120*1500*1400
100			1473	57		5780*1500*1400
120			1778	69		6500*1500*1400
Mark:	The data are just for reference, the final data pls check the final drawing.